氮化钛沉积膜的摩擦性能研究

IMECH-IR > 力学所知识产出(1956-2008)

	氮化钛沉积膜的摩擦性能研究
Alternative Title	Tribological Behavior of Plasma-Arc-Deposited TiN Coating on a Stainless Steel
	张泰华; 郇勇; 杨业敏
Source Publication	摩擦学学报
	2003
Volume	23 Issue:5 Pages:367-370
ISSN	1004-0595
Abstract	采用等离子电弧沉积法在9Cr18钢表面制备了厚约0.5 μm的TiN薄膜，通过显微硬度测试以及纳米压痕和纳米划痕试验，对比考察了9Cr18钢及其表面TiN薄膜的机械和摩擦性能。结果表明，9Cr18钢及其表面TiN沉积膜的纳米硬度分别为8GPa和38GPa，弹性模量分别为250GPa和580 GPa，9Cr18、TiN和有机薄膜的摩擦系数分别为0.40、0.12和、0.10；TiN沉积膜可显著提高基体钢的承载和耐磨能力。
Keyword	氮化钛薄膜显微硬度纳米压痕纳米划痕摩擦性能
Subject Area	力学
Indexed By	CSCD
Language	中文
CSCD ID	CSCD:1169312
Citation statistics	Cited Times:9[CSCD] [CSCD Record]
Document Type	期刊论文
Identifier	http://dspace.imech.ac.cn/handle/311007/16107
Collection	力学所知识产出(1956-2008)
Recommended Citation GB/T 7714	张泰华,郇勇,杨业敏. 氮化钛沉积膜的摩擦性能研究[J]. 摩擦学学报,2003,23,5,:367-370.
APA	张泰华,郇勇,&杨业敏.(2003).氮化钛沉积膜的摩擦性能研究.摩擦学学报,23(5),367-370.
MLA	张泰华,et al."氮化钛沉积膜的摩擦性能研究".摩擦学学报 23.5(2003):367-370.

Related Services

Bookmark

Lanfanshu

Similar articles in Bing Scholar

Terms of Use

No data!

Social Bookmark/Share

File name:	030502.pdf
Format:	Adobe PDF

This file does not support browsing at this time

All comments (0)

No comment.

The comment function is only available to registered usersLog In

If you have any objections to this item, please fill out the form below and the administrator will contact you as soon as possible.
Content:
Email：	*
Institution:
Verification Code:	Refresh

Any comments and suggestions are welcomed.
Title:	*
Content:
Email：	*
Verification Code:	Refresh

中国科学院力学研究所机构知识库