φ800激波管流场参数测量

IMECH-IR > 力学所知识产出(1956-2008)

	φ800激波管流场参数测量
	竺乃宜; 李红德; 邹惠良; 李连祥
Source Publication	力学学报
	1978
Issue	3 Pages:234-237
ISSN	0459-1879
Abstract	<正> 1.实验装置和测量原理本实验使用不锈钢圆形直激波管,高压段长1.6m,内径223mm;低压及实验段内径800mm。使用氢氧燃烧驱动,驱动压力约80ata,测量支架距膜片的有效距离为14m。我们用薄膜电阻温度计式的金膜热探头在激波管中测量②区长度和波面形状,用电探针来测量分界区与③区的交界处。它们的信号直接或经过热电模拟线路以后,输
Keyword	激波管参数测量湍流边界层修正实验电探针波面热探头温度曲线实验时间
Language	中文
Document Type	期刊论文
Identifier	http://dspace.imech.ac.cn/handle/311007/38730
Collection	力学所知识产出(1956-2008)
Corresponding Author	竺乃宜
Recommended Citation GB/T 7714	竺乃宜,李红德,邹惠良,等. φ800激波管流场参数测量[J]. 力学学报,1978,3,:234-237.
APA	竺乃宜,李红德,邹惠良,&李连祥.(1978).φ800激波管流场参数测量.力学学报(3),234-237.
MLA	竺乃宜,et al."φ800激波管流场参数测量".力学学报 .3(1978):234-237.

Related Services

Bookmark

Lanfanshu

Similar articles in Bing Scholar

Terms of Use

No data!

Social Bookmark/Share

File name:	Paper1576.pdf
Format:	Adobe PDF

This file does not support browsing at this time

All comments (0)

No comment.

The comment function is only available to registered usersLog In

If you have any objections to this item, please fill out the form below and the administrator will contact you as soon as possible.
Content:
Email：	*
Institution:
Verification Code:	Refresh

Any comments and suggestions are welcomed.
Title:	*
Content:
Email：	*
Verification Code:	Refresh

中国科学院力学研究所机构知识库