Knowledge Management System of Institue of Mechanics, CAS
热处理对定向凝固Co基合金微观组织的影响 | |
Alternative Title | Effect of Heat-treatment on Microstructure of Directional Solidification Co-base Superalloy |
孙跃军; 林陌思; 葛艳辉; 张军 | |
Source Publication | 热加工工艺 |
2011 | |
Volume | 40Issue:12Pages:152-154,159 |
ISSN | 1001-3814 |
Abstract | 利用XRD和扫描电镜研究了热处理对一种定向凝固Co基合金微观组织的影响。结果表明:Co基合金的铸态组织主要由Co的固溶体基体、M_7C_3、MC和M_(23)C_6碳化物组成,其中M_7C_3和MC为块状,主要分布在枝晶间,M_(23)C_6呈颗粒状,分布在块状M_7C_3和MC周围。合金经1150℃×4h固溶处理后,大部分块状M_7C_3和MC溶入Co的固溶体基体中,在随后的空冷中析出颗粒状M_(23)C_6。在870℃和970℃时效时,随时效温度的升高和时效时间的延长,合金中M23C6的尺寸逐渐增大。 |
Other Abstract | The effects of heat-treatment on the microstructure of directional solidification Co-base superalloy were investigated using XRD and SEM.The results show that the microstructure of Co-base superalloy as-cast is composed of Co matrix,M7C3,MC and M23C6.Among them,MC and M7C3 distributes in inter dentrite and M23C6 near the MC and M7C3.After solid solution heat-treating at 1150 ℃ for 4 h,most MC and M7C3 dissolves into Co-base matrix,M23C6 is deposited from Co matrix during following air cooling.When aging at 870 ℃and 970 ℃,the size of M23C6 increases with the increase of temperature and aging time. |
Keyword | 定向凝固co基合金 固溶 时效 碳化物 |
Subject Area | 力学 |
URL | 查看原文 |
Indexed By | CSCD |
Language | 中文 |
CSCD ID | CSCD:4425540 |
Department | LMFS多相流及流固耦合(LHO) |
Citation statistics |
Cited Times:2[CSCD]
[CSCD Record]
|
Document Type | 期刊论文 |
Identifier | http://dspace.imech.ac.cn/handle/311007/45056 |
Collection | 水动力学与海洋工程重点实验室(2009-2011) |
Corresponding Author | 孙跃军 |
Recommended Citation GB/T 7714 | 孙跃军,林陌思,葛艳辉,等. 热处理对定向凝固Co基合金微观组织的影响[J]. 热加工工艺,2011,40,12,:152-154,159. |
APA | 孙跃军,林陌思,葛艳辉,&张军.(2011).热处理对定向凝固Co基合金微观组织的影响.热加工工艺,40(12),152-154,159. |
MLA | 孙跃军,et al."热处理对定向凝固Co基合金微观组织的影响".热加工工艺 40.12(2011):152-154,159. |
Files in This Item: | Download All | |||||
File Name/Size | DocType | Version | Access | License | ||
C2011J125.pdf(858KB) | 开放获取 | -- | View Download |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment