| Cutting AISI 1045 steel at very high speeds | |
Ye GG(叶贵根); Xue SF; Ma W(马维); Jiang MQ(蒋敏强) ; Ling Z(凌中); Tong XH; Dai LH(戴兰宏); Dai, LH; Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China.
| |
| Source Publication | INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
 |
| 2012-05-01 | |
| Volume | 56Pages:1-9 |
| ISSN | 0890-6955 |
| Abstract | An experimental device, based on the light-gas gun technology, was set up to realize high speed cutting over a wide range of cutting speeds from 30 m/s to 200 m/s. High-speed cutting experiments were performed on AISI 1045 steels. The investigation of chip morphology, micro-structures, micro-hardness and the finished surface integrity were carried out, focusing on the physical phenomena accompanying the saw-tooth chip formation. The results reveal that, with increasing the cutting speed, the transition of chip morphology from continue to saw-tooth could be attributed to repeated thermoplastic shear-banding rather than periodic cracking. In particular, a severe material flow leading to mass transfer of heat was observed at very high cutting speed. The effect of mass transfer of heat on thermoplastic shear instability was further investigated, which implies that the mass transfer of heat would retard the formation of saw-tooth chip. Finally, the influence of cutting speed and mass transfer on the temperature distribution during high speed machining was briefly discussed. |
| Keyword | High Speed Machining Aisi 1045 Steel Chip Formation Surface Integrity Thermoplastic Shear Chip Formation Temperature-fields Flow-stress Shear Instability Behavior Simulation Forces |
| Subject Area | 冲击动力学 |
| URL | 查看原文 |
| Indexed By | SCI ; EI |
| Language | 英语 |
| WOS ID | WOS:000302049400001 |
| Funding Organization | This work has been supported by the Nature Science Foundation of China (Grants nos.11132011, 10725211, 11021262 and 11002144), the National Basic Research Program of China (Grant no: 2009CB724401), and the National Natural Science Foundation of China-NSAF. Grant no: 10976100. |
| Department | LNM冲击动力学与新型材料力学性能 |
| Classification | 一类 |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://dspace.imech.ac.cn/handle/311007/46683 |
| Collection | 非线性力学国家重点实验室 |
| Corresponding Author | Dai, LH; Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China. |
| Recommended Citation GB/T 7714 | Ye GG,Xue SF,Ma W,et al. Cutting AISI 1045 steel at very high speeds[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE,2012,56:1-9. |
| APA | 叶贵根.,Xue SF.,马维.,蒋敏强.,凌中.,...&Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China..(2012).Cutting AISI 1045 steel at very high speeds.INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE,56,1-9. |
| MLA | 叶贵根,et al."Cutting AISI 1045 steel at very high speeds".INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE 56(2012):1-9. |
| Files in This Item: | Download All | |||||
| File Name/Size | DocType | Version | Access | License | ||
| SCI-J2012-043.pdf（1701KB） | 开放获取 | -- | View Download | |||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment