| Detailed modeling of the effects of K/Na additives on the thermal DeNO(x) process | |
Guo XF(郭啸峰) ; Wei XL(魏小林); Li S(李森); Wei, XL (reprint author), Chinese Acad Sci, Inst Mech, State Key Lab High Temp Gas Dynam, Beijing 100190, Peoples R China.
| |
| Source Publication | ENERGY & FUELS
 |
| 2013-01-17 | |
| Volume | 27Issue:1Pages:421-429 |
| ISSN | 0887-0624 |
| Abstract | A reduced mechanism simplified from a detailed chemical kinetics mechanism containing N/H/O/K/Na elements was developed and validated in this paper. When the reduced mechanism was integrated into computational fluid dynamics (CFD) software, the effect of potassium and sodium additives on the selective non-catalytic reduction (SNCR) thermal DeNO(x) process was simulated. The simulation results were compared to those of experiments under different oxygen concentrations, normalized stoichiometric ratios (NSRs) of the N agent/NO, and alkali metal additive concentrations within the temperature range from 1023 to 1523 K, and the simulation results coincided qualitatively with those of the experiment in an entrained flow reactor. The alkali metal additives did not change the effects of the oxygen concentration and NSR on the SNCR process: a conversion temperature point exists at about 1173-1223 K; below the conversion temperature point, a higher oxygen concentration can promote the effect of SNCR, while above the conversion temperature point, the efficiency will be reduced; and a higher NSR is beneficial for NO reduction, but its effect becomes less obvious with the increase of the reducing agent. The alkali metal additives extend the "temperature window" toward a lower temperature by about 50-100 K with more OH and NH2 radical production, and the effect of K additives is less obvious than that of Na. However, the promoting effect of the K additive cannot be well-simulated because of the lack of a suitable mechanism. A K chemistry mechanism should be optimized on the basis of its effect on the SNCR process. The K or Na concentration almost has no influence on the effect of alkali metal additives on the thermal DeNO(x) process when the K or Na concentration is beyond a certain value. |
| Keyword | Computational Fluid Dynamics Experiments Oxygen Potassium Selective Catalytic Reduction Sodium Chemistry Mechanism Detailed Chemical Kinetic Detailed Modeling Entrained Flow Reactor Metal Additives Na Concentration No Reduction Normalized Stoichiometric Ratio Oxygen Concentrations Promoting Effect Radical Production Reduced Mechanisms Selective Non-catalytic Reduction Sodium Additive Temperature Range Temperature Window Thermal Deno |
| Subject Area | 化工流体力学 |
| URL | 查看原文 |
| Indexed By | SCI ; EI |
| Language | 英语 |
| WOS ID | WOS:000317327700049 |
| Funding Organization | Chinese Natural Science Foundation [91130028] |
| Department | LHD高效洁净燃烧(CPCR) |
| Classification | 二类/Q1 |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://dspace.imech.ac.cn/handle/311007/47237 |
| Collection | 高温气体动力学国家重点实验室 |
| Corresponding Author | Wei, XL (reprint author), Chinese Acad Sci, Inst Mech, State Key Lab High Temp Gas Dynam, Beijing 100190, Peoples R China. |
| Recommended Citation GB/T 7714 | Guo XF,Wei XL,Li S,et al. Detailed modeling of the effects of K/Na additives on the thermal DeNO(x) process[J]. ENERGY & FUELS,2013,27,1,:421-429. |
| APA | 郭啸峰,魏小林,李森,&Wei, XL .(2013).Detailed modeling of the effects of K/Na additives on the thermal DeNO(x) process.ENERGY & FUELS,27(1),421-429. |
| MLA | 郭啸峰,et al."Detailed modeling of the effects of K/Na additives on the thermal DeNO(x) process".ENERGY & FUELS 27.1(2013):421-429. |
| Files in This Item: | ||||||
| File Name/Size | DocType | Version | Access | License | ||
| IMCAS-J2013-007.pdf（628KB） | 开放获取 | -- | View Application Full Text | |||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment