| Simultaneous improvement of tensile strength and ductility in micro-duplex structure consisting of austenite and ferrite | |
Chen L(陈柳) ; Yuan FP(袁福平); Jiang P(姜萍); Xie JJ(谢季佳); Wu XL(武晓雷); Wu XL(武晓雷)
| |
| Source Publication | Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing
 |
| 2014 | |
| Volume | 618Pages:563-571 |
| ISSN | 0921-5093 |
| Abstract | A micro-duplex structure consisting of austenite and ferrite was produced by equal channel angular pressing and subsequent intercritical annealing. As compared to coarse-grained (CG) counterpart, the strength and ductility of micro-duplex samples are enhanced simultaneously due to smaller grain sizes in both phases and more uniformly distributed austenite in ferrite matrix. The average yield stress and uniform elongation are increased to 540 MPa and 0.3 as compared to 403MPa and 0.26 of its CG counterpart respectively. The Hall–Petch coefficients of austenite and ferrite grain boundaries were quantitatively measured as 224.9 and 428.9 MPa μm1/2 respectively. In addition, a Hall–Petch type coefficient was used to describe the ability of phase boundary to obstruct dislocation motion, which was measured as 309.7 MPa μm1/2. Furthermore, the surface-to-volume ratio of phase boundary in micro-duplex structure was estimated to be 1.17×106 m−1, which is increased by an order of magnitude as compared to 1.2×105 m−1 of its CG counterpart. Based on the strain gradient theory, a model was proposed to describe the effect of surface-to-volume ratio of phase boundary on strain hardening rate, which shows a good agreement with the experimental results. |
| Keyword | Duplex Stainless Steel Equal Channel Angular Pressing Strain Hardening Modeling Phase Boundary |
| URL | 查看原文 |
| Indexed By | SCI ; EI |
| Language | 英语 |
| WOS ID | WOS:000344439500069 |
| Funding Organization | The authors would like to thank the financial supports by 973 Program of China (Nos. 2012CB932203 and 2012CB937500) and NSFC (Grants nos. 51301187, 11222224, 11021262 and 11072243). |
| Department | LNM材料介观力学性能的表征 |
| Classification | 一类 |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://dspace.imech.ac.cn/handle/311007/49115 |
| Collection | 非线性力学国家重点实验室 |
| Corresponding Author | Wu XL(武晓雷) |
| Recommended Citation GB/T 7714 | Chen L,Yuan FP,Jiang P,et al. Simultaneous improvement of tensile strength and ductility in micro-duplex structure consisting of austenite and ferrite[J]. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,2014,618:563-571. |
| APA | Chen L,Yuan FP,Jiang P,Xie JJ,Wu XL,&武晓雷.(2014).Simultaneous improvement of tensile strength and ductility in micro-duplex structure consisting of austenite and ferrite.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,618,563-571. |
| MLA | Chen L,et al."Simultaneous improvement of tensile strength and ductility in micro-duplex structure consisting of austenite and ferrite".Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 618(2014):563-571. |
| Files in This Item: | Download All | |||||
| File Name/Size | DocType | Version | Access | License | ||
| 1-s2.0-S092150931401（3202KB） | 开放获取 | License | View Download | |||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment