| Mechanical properties and deformation mechanism of Mg-Al-Zn alloy with gradient microstructure in grain size and orientation | |
Chen L(陈柳) ; Yuan FP(袁福平); Jiang P(姜萍); Xie JJ(谢季佳); Wu XL(武晓雷); Wu, XL (reprint author), Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China.
| |
| Source Publication | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 2017-05-10 | |
| Volume | 694Pages:98-109 |
| ISSN | 0921-5093 |
| Abstract | The surface mechanical attrition treatment was taken to fabricate the gradient structure in AZ31 magnesium alloy sheet. Microstructural investigations demonstrate the formation of dual gradients with respect to grain size and orientation where the microstructural sizes decreased from several microns to about 200 nm from center area to treated surface while the c-axis gradually inclined from being vertical to treated plane towards parallel with it. According to tensile results the gradient structured sample has yield strength of 305 MPa in average which is increased by about 4 times when compared with its coarse-grained counterpart. Meanwhile contrary to quickly failure after necking in most traditional magnesium alloys the failure process of gradient structure appears more gently which makes it has 6.5% uniform elongation but 11.5% total elongation. The further comparative tensile tests for separated gradient layers and corresponding cores demonstrate that the gradient structured sample has higher elongation either in uniform or in post-uniform stages. In order to elucidate the relationship between mechanical properties and deformation mechanisms for this dual gradient structure the repeated stress relaxation tests and pole figure examinations via X-ray diffraction were conducted in constituent gradient layer and corresponding core as well as gradient structured sample. The results show that the pyramidal dislocations in dual gradient structure are activated through the whole thickness of sample. Together with the contribution of grain-size gradient more dislocations are activated in dual gradient structure under tensile loading which results in stronger strain hardening and hence higher tensile ductility. |
| Keyword | Gradient Structure Mechanical Properties Tensile Ductility Magnesium Alloy |
| DOI | 10.1016/j.msea.2017.04.005 |
| Indexed By | SCI ; EI |
| Language | 英语 |
| WOS ID | WOS:000401597300013 |
| WOS Keyword | MAGNESIUM AZ31 ALLOY ; NONBASAL SLIP ; ULTRAHIGH-STRENGTH ; PURE MAGNESIUM ; DUCTILITY ; TEMPERATURE ; ANISOTROPY ; AUSTENITE ; SYSTEMS ; COPPER |
| WOS Research Area | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
| WOS Subject | Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| Funding Organization | National Natural Science Foundation of China (NSFC)(51301187 ; Strategic Priority Research Program of the Chinese Academy of Sciences(XDB22040500) ; 973 Programs(2012CB932203 ; 11572328 ; 2012CB937500 ; 11222224 ; 6138504) ; 11472286) |
| Department | LNM实验平台 ; LNM材料介观力学性能的表征 |
| Classification | 一类 |
| Ranking | 1 |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://dspace.imech.ac.cn/handle/311007/60554 |
| Collection | 非线性力学国家重点实验室 |
| Corresponding Author | Wu, XL (reprint author), Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China. |
| Recommended Citation GB/T 7714 | Chen L,Yuan FP,Jiang P,et al. Mechanical properties and deformation mechanism of Mg-Al-Zn alloy with gradient microstructure in grain size and orientation[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2017,694:98-109. |
| APA | 陈柳,袁福平,姜萍,谢季佳,武晓雷,&Wu, XL .(2017).Mechanical properties and deformation mechanism of Mg-Al-Zn alloy with gradient microstructure in grain size and orientation.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,694,98-109. |
| MLA | 陈柳,et al."Mechanical properties and deformation mechanism of Mg-Al-Zn alloy with gradient microstructure in grain size and orientation".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 694(2017):98-109. |
| Files in This Item: | Download All | |||||
| File Name/Size | DocType | Version | Access | License | ||
| JouAr-2017-048.pdf（2056KB） | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | View Download | |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment