| Analysis on failure mechanism of scarf joints with brittleductile adhesives subjected to uniaxial tensile loads | |
Liao LJ(廖丽娟)1; Sawa T2; Huang CG(黄晨光)1
| |
| Source Publication | ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE 2013 |
| 2013 | |
| Conference Name | ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE 2013 |
| Conference Date | November 15, 2013 - November 21, 2013 |
| Conference Place | San Diego, CA, United states |
| Abstract | The failure mechanism of scarf joints with a series of angles and brittle-ductile adhesives subjected to uniaxial tensile loads is analyzed by using a numerical method which employs a cohesive zone model (CZM) with a bilinear shape in mixedmode (mode I and II). The adopted methodology is validated via comparisons between the present simulated results and the existing experimental measurements, which illustrate that the load-bearing capacity increases as the scarf angle decreases. More important, it is observed that the failure of the joint is governed by not only the ultimate tensile loads, but also the applied tensile displacement until complete failure, which is related to the brittle-ductile properties of the adhesive layer. In addition, failure energy, which is defined by using the area of the load-displacement curve of the joint, is adopted to estimate the joint strength. Subsequently, the numerical results show that the strength of the joint adopting ductile adhesive with higher failure energy is higher than that of the joint using brittle adhesive with lower failure energy. Copyright © 2013 by ASME. |
| Keyword | Adhesives Numerical methods Safety engineering Tensile stress Cohesive zone model Ductile adhesives Ductile properties Failure mechanism Load bearing capacity Load displacement curve Simulated results Tensile displacement |
| ISBN | 9780791856192 |
| Indexed By | EI |
| Language | 英语 |
| Citation statistics | |
| Document Type | 会议论文 |
| Identifier | http://dspace.imech.ac.cn/handle/311007/77994 |
| Collection | 流固耦合系统力学重点实验室 |
| Affiliation | 1.Institute of Mechanics, Chinese Academy of Sciences, 15, Beisihuan West Road, Beijing, 100190, China; 2.Graduate School of Engineering, Hiroshima University, 1-4, Kagamiyama, Higashihiroshima, Hiroshima, 739-8527, Japan |
| Recommended Citation GB/T 7714 | Liao LJ,Sawa T,Huang CG. Analysis on failure mechanism of scarf joints with brittleductile adhesives subjected to uniaxial tensile loads[C]ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE 2013,2013. |
| Files in This Item: | Download All | |||||
| File Name/Size | DocType | Version | Access | License | ||
| EiCpA020.pdf（748KB） | 会议论文 | 开放获取 | CC BY-NC-SA | View Download | ||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment