Construction of bi-layer biluminophore fast-responding pressure sensitive coating for non-contact unsteady aerodynamic testing | |
Yang D1; Ren JK2; Li JW(栗继伟)3; Wang QL1; Wang Q(汪球)3; Xie Z2; Qu XZ1 | |
Corresponding Author | Wang, Qiu() ; Xie, Zheng([email protected]) ; Qu, Xiaozhong([email protected]) |
Source Publication | POLYMER TESTING |
2019-08-01 | |
Volume | 77Pages:8 |
ISSN | 0142-9418 |
Abstract | Herein we report on a biluminophore fast-responding pressure sensitive coating with a bi-layer structure prepared by a non-sensitive reference base paint and subsequently a classic polymer-ceramic pressure sensitive paint (PSP). The coating procedure is fully sprayable and allows the separation of the two luminophores in each layer to prevent their interference that may affect the pressure responsibility. The major advance is the use of solgel process of tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES) to make the bottom reference layer which ensures the spreading and affinity of the top PSP, composed of a room-temperature vulcanizing silicone rubber (RTV), so that very thin PSP layer, i.e. less than 5 mu m was achieved. Besides, silane-functionalized carbon dots (CDs) was selected as the reference probe, for it could be well-incorporated with the TEOS/MTES matrix, and gained high loading level and hence strong luminescence of the basecoat to overcome the attenuation effect of the top PSP layer. The resultant biluminophore bi-layer fast-responding PSP (denoted as Fast bi-PSP) showed two completed separated emissions with lambda(max) at 430 and 600 nm for the incorporated CDs and the oxygen sensitive ruthenium complex dye, which enables the utility of intensity ratio from blue and red luminescence for the measurement of surface pressure by following Stern-Volmer relationship. Using a shock tube, the response time of the Fast bi-PSP coating was determined to be 0.4-0.6 ms according to the chemical composition. The ability of the coating for monitoring the dynamic evolution of full-field surface pressure was demonstrated on sample plates at attack angles of 0 degrees and 5 degrees. Our work suggests a facile but efficient way for the future design of self-referenced photoluminescent non-contact surface pressure sensing systems. |
Keyword | Pressure sensitive paint (PSP) Bi-layer structured coating Fast-response Self-referenced measurement |
DOI | 10.1016/j.polymertesting.2019.105922 |
Indexed By | SCI ; EI |
Language | 英语 |
WOS ID | WOS:000487002700057 |
WOS Keyword | POLYMER MATRIX ; CARBON DOTS ; PAINT ; SENSOR ; OXYGEN ; LUMINOPHORE ; WHITE |
WOS Research Area | Materials Science ; Polymer Science |
WOS Subject | Materials Science, Characterization & Testing ; Polymer Science |
Funding Project | Chinese Academy of Sciences[CXJJ-15M060] ; National Natural Science Foundation of China[21875267] ; National Natural Science Foundation of China[51561145004] |
Funding Organization | Chinese Academy of Sciences ; National Natural Science Foundation of China |
Classification | 二类/Q1 |
Ranking | 1 |
Contributor | Wang, Qiu ; Xie, Zheng ; Qu, Xiaozhong |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://dspace.imech.ac.cn/handle/311007/80622 |
Collection | 高温气体动力学国家重点实验室 |
Affiliation | 1.Univ Chinese Acad Sci, Coll Mat Sci & Optoelect Technol, Ctr Mat Sci & Optoelect Engn, Beijing 100049, Peoples R China; 2.Chinese Acad Sci, Tech Inst Phys & Chem, Key Lab Photochem Convers & Optoelect Mat, Beijing 100190, Peoples R China; 3.Chinese Acad Sci, Inst Mech, State Key Lab High Temp Gas Dynam, Beijing 100190, Peoples R China |
Recommended Citation GB/T 7714 | Yang D,Ren JK,Li JW,et al. Construction of bi-layer biluminophore fast-responding pressure sensitive coating for non-contact unsteady aerodynamic testing[J]. POLYMER TESTING,2019,77:8.Rp_Au:Wang, Qiu, Xie, Zheng, Qu, Xiaozhong |
APA | Yang D.,Ren JK.,栗继伟.,Wang QL.,汪球.,...&Qu XZ.(2019).Construction of bi-layer biluminophore fast-responding pressure sensitive coating for non-contact unsteady aerodynamic testing.POLYMER TESTING,77,8. |
MLA | Yang D,et al."Construction of bi-layer biluminophore fast-responding pressure sensitive coating for non-contact unsteady aerodynamic testing".POLYMER TESTING 77(2019):8. |
Files in This Item: | Download All | |||||
File Name/Size | DocType | Version | Access | License | ||
Jp2019413.pdf(2608KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | View Download |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment