Trans-scale characterization of interface fracture in peel test for metal film/ceramic substrate systems

doi:10.1016/j.engfracmech.2019.106679

IMECH-IR > 非线性力学国家重点实验室

	Trans-scale characterization of interface fracture in peel test for metal film/ceramic substrate systems
	Song JR(宋晶如)1 ; Wei YG(魏悦广)2
通讯作者	Wei, Yueguang([email protected])
发表期刊	ENGINEERING FRACTURE MECHANICS
	2019-11-01
卷号	221 页码:12
ISSN	0013-7944
摘要	In order to describe the interfacial fracture behaviors of the metal thin film with nano- or microscale thickness peeled on the ceramic substrate, a trans-scale mechanics model has been adopted. In the trans-scale mechanics model, both the strain gradient effect and surface/interface effect are considered. In addition, two fracture process models are used in present study, which are the cohesive zone model and the virtual internal bond model. Using the trans-scale mechanics theory and the interface models, the size effect of the interfacial separation strength between the metal thin films and the ceramic substrates is analyzed systematically by using the peel test. The results show that the fracture process zone size could be taken as the indicator of the trans-scale interface fracture characterization. The interface effect should be considered when the fracture process zone size is at the nanoscale, and the obtained interfacial separation strength is much higher than the conventional separation strength. The material length scale parameters of the metal films are determined by comparing the interfacial energy release rate predicted by the scale theories with the experimental results, which shows that the material length scale parameter could be regarded as the size of active plastic zone in the small scale yielding case during the peeling process.
关键词	Interfacial separation strength Trans-scale mechanics theory Size effect Peel test Length scale parameter
DOI	10.1016/j.engfracmech.2019.106679
收录类别	SCI ; EI
语种	英语
WOS记录号	WOS:000489845700018
关键词[WOS]	STRAIN GRADIENT PLASTICITY ; DUCTILE THIN-FILMS ; CRACK-GROWTH ; NUMERICAL-SIMULATION ; DELAMINATION ; MECHANICS ; PARAMETERS ; COATINGS ; WORK ; SIZE
WOS研究方向	Mechanics
WOS类目	Mechanics
资助项目	National Natural Science Foundation of China[11972347] ; National Natural Science Foundation of China[11502273] ; National Natural Science Foundation of China[11432014] ; National Natural Science Foundation of China[11672301] ; National Natural Science Foundation of China[11890681] ; National Natural Science Foundation of China[11521202] ; Strategic Priority Research Program of the Chinese Academy of Sciences[XDB22040501]
项目资助者	National Natural Science Foundation of China ; Strategic Priority Research Program of the Chinese Academy of Sciences
论文分区	二类/Q1
力学所作者排名	1
RpAuthor	Wei, Yueguang
引用统计	被引频次：9[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://dspace.imech.ac.cn/handle/311007/80655
专题	非线性力学国家重点实验室
作者单位	1.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China; 2.Peking Univ, Coll Engn, Dept Mech, Beijing 100871, Peoples R China
推荐引用方式 GB/T 7714	Song JR,Wei YG. Trans-scale characterization of interface fracture in peel test for metal film/ceramic substrate systems[J]. ENGINEERING FRACTURE MECHANICS,2019,221:12.Rp_Au:Wei, Yueguang
APA	宋晶如,&魏悦广.(2019).Trans-scale characterization of interface fracture in peel test for metal film/ceramic substrate systems.ENGINEERING FRACTURE MECHANICS,221,12.
MLA	宋晶如,et al."Trans-scale characterization of interface fracture in peel test for metal film/ceramic substrate systems".ENGINEERING FRACTURE MECHANICS 221(2019):12.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Jp2019402.pdf（1363KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载