| Numerical study of convective heat transfer of a supersonic combustor with varied inlet flow conditions | |
Fan WH(范文慧)1,2; Zhong FQ(仲峰泉)1,2 ; Ma SG(马素刚)2; Zhang XY(张新宇)1,2
| |
| Corresponding Author | Zhong, F. Q.([email protected]) |
| Source Publication | ACTA MECHANICA SINICA
 |
| 2019-10-01 | |
| Volume | 35Issue:5Pages:943-953 |
| ISSN | 0567-7718 |
| Abstract | Characteristics of convective heat transfer of a supersonic model combustor with variable inlet flow conditions were studied by numerical simulation in this paper. The three-dimensional flow and wall heat flux at different air inlet Mach numbers of 2.2, 2.8 and 3.2 were studied numerically with Reynolds-averaged Navier-Stokes equations with a shear-stress transport (SST) k-omega turbulence model and a three-step reaction model. Meanwhile, ethylene was chosen as the fuel, and the fixed fuel-to-air equivalence ratio is 0.8 in all cases in this paper. The results of the simulations indicate that wall heat flux distribution of the combustor is very non-uniform with several peaks of wall heat flux at varied locations. For the low inlet Mach number of 2.2, a shock train structure is formed in the isolator, and three peaks of wall heat flux are located respectively on the backward face of the cavity, on the side wall near the fuel injection and on the bottom wall near the injection holes, and a maximum wall heat flux reaches 5.4 MW/m(2). For the medium inlet Mach number of 2.8, there exists a much shorter shock structure with three peaks of wall heat flux similar to that of Mach number 2.2. However, as the inlet Mach number increased to 3.2, there is no shock structure upstream of fuel injections, and the combustor flow is in a supersonic mode with different locations and values of wall heat flux peaks. The statistical results of wall heat loading show that the change of total wall heat is not monotonic with the increase of inlet Mach number, and the maximum appears in the case of Mach number being 2.8. Meanwhile, for all the cases, the bottom wall takes up more than 50% of the total heat loading. |
| Keyword | Wall heat flux Numerical simulation Ethylene Supersonic combustor |
| DOI | 10.1007/s10409-019-00882-x |
| Indexed By | SCI ; EI ; CSCD |
| Language | 英语 |
| WOS ID | WOS:000501851500001 |
| WOS Keyword | SCRAMJET COMBUSTOR ; FLUX |
| WOS Research Area | Engineering ; Mechanics |
| WOS Subject | Engineering, Mechanical ; Mechanics |
| Funding Project | National Natural Science Foundation of China[11672307] ; Youth Innovation Promotion Association, Chinese Academy of Sciences |
| Funding Organization | National Natural Science Foundation of China ; Youth Innovation Promotion Association, Chinese Academy of Sciences |
| Classification | 二类 |
| Ranking | 1 |
| Contributor | Zhong, F. Q. |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://dspace.imech.ac.cn/handle/311007/81231 |
| Collection | 高温气体动力学国家重点实验室 |
| Affiliation | 1.Chinese Acad Sci, Inst Mech, State Key Lab High Temp Gas Dynam, Beijing 100190, Peoples R China; 2.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China |
| Recommended Citation GB/T 7714 | Fan WH,Zhong FQ,Ma SG,et al. Numerical study of convective heat transfer of a supersonic combustor with varied inlet flow conditions[J]. ACTA MECHANICA SINICA,2019,35,5,:943-953.Rp_Au:Zhong, F. Q. |
| APA | 范文慧,仲峰泉,马素刚,&张新宇.(2019).Numerical study of convective heat transfer of a supersonic combustor with varied inlet flow conditions.ACTA MECHANICA SINICA,35(5),943-953. |
| MLA | 范文慧,et al."Numerical study of convective heat transfer of a supersonic combustor with varied inlet flow conditions".ACTA MECHANICA SINICA 35.5(2019):943-953. |
| Files in This Item: | Download All | |||||
| File Name/Size | DocType | Version | Access | License | ||
| Jp2019516.pdf（4075KB） | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | View Download | |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment