Effect of Post-Weld Aging Temperature on Microstructure and Mechanical Properties of Weld Metal of 15-5 PH Stainless Steel | |
Niu JP1; Cui B1; Jin HJ(晋会锦)2; Yan JL3; Meng W1; Min CY1; Xu D1 | |
Corresponding Author | Cui, Bing([email protected]) |
Source Publication | JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE |
2020-10-21 | |
Pages | 8 |
ISSN | 1059-9495 |
Abstract | This study is an attempt to correlate the microstructure and mechanical properties of weld metal of commercial 15Cr-5Ni precipitation-hardening stainless steel at different post-weld treatments. The weld metal is conducted by gas tungsten arc welding, and post-weld aging is performed at three different temperatures, viz. 580 degrees C, 600 degrees C and 620 degrees C. After post-weld aging treatment, the microstructure and mechanical properties of weld metals are investigated by OM, SEM, EDS, EBSD and impact tester. The results indicate that microstructure of weld metals by post-weld aging treatment consists predominately of martensite, reversion austenite and copper-rich phase. The amount of austenite and the size of copper-rich phase increase with increase in the post-weld aging temperature. The tensile strength of weld metals first increases and then decreases with the increasing of post-weld aging temperature. The former is due to the size and distribution of copper-rich phase, and the latter is due to the increasing of amount of reversion austenite. |
Keyword | copper-rich phase mechanical properties post-weld aging temperature reversion austenite weld metal |
DOI | 10.1007/s11665-020-05193-y |
Indexed By | SCI ; EI |
Language | 英语 |
WOS ID | WOS:000580961400001 |
WOS Keyword | RESOLUTION ELECTRON-MICROSCOPY ; PRECIPITATION ; PARAMETERS ; EVOLUTION ; BEHAVIOR |
WOS Research Area | Materials Science |
WOS Subject | Materials Science, Multidisciplinary |
Funding Project | Natural Science Foundation of Anhui Provincial Education Department[KJ2019A0061] ; Natural Science Foundation of Anhui Provincial Education Department[KJ2019A0069] ; Opening Project of Anhui Province Key Laboratory of Metallurgy Engineering & Resources Recycling[SKF19-04] ; State Key Laboratory of New Brazing Materials and Technology[SKLABFMT-201803] ; Project National United Engineering Laboratory for Advanced Bearing Tribology[201912] ; Anhui Provincial Natural Science Foundation[1908085QE198] ; Anhui Provincial Natural Science Foundation[2008085QE231] |
Funding Organization | Natural Science Foundation of Anhui Provincial Education Department ; Opening Project of Anhui Province Key Laboratory of Metallurgy Engineering & Resources Recycling ; State Key Laboratory of New Brazing Materials and Technology ; Project National United Engineering Laboratory for Advanced Bearing Tribology ; Anhui Provincial Natural Science Foundation |
Classification | Q3 |
Ranking | 3 |
Contributor | Cui, Bing |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://dspace.imech.ac.cn/handle/311007/85358 |
Collection | 非线性力学国家重点实验室 |
Affiliation | 1.Anhui Univ Technol, Anhui Prov Key Lab Met Engn & Resources Recycling, Maanshan 243002, Peoples R China; 2.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China; 3.Datang Corp Sci & Technol Res Inst, East China Elect Power Test & Res Inst China, Hefei 23000, Peoples R China |
Recommended Citation GB/T 7714 | Niu JP,Cui B,Jin HJ,et al. Effect of Post-Weld Aging Temperature on Microstructure and Mechanical Properties of Weld Metal of 15-5 PH Stainless Steel[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2020:8.Rp_Au:Cui, Bing |
APA | Niu JP.,Cui B.,晋会锦.,Yan JL.,Meng W.,...&Xu D.(2020).Effect of Post-Weld Aging Temperature on Microstructure and Mechanical Properties of Weld Metal of 15-5 PH Stainless Steel.JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,8. |
MLA | Niu JP,et al."Effect of Post-Weld Aging Temperature on Microstructure and Mechanical Properties of Weld Metal of 15-5 PH Stainless Steel".JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020):8. |
Files in This Item: | Download All | |||||
File Name/Size | DocType | Version | Access | License | ||
Jp2020309.pdf(2430KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | View Download |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment