| Investigation of the Microstructure and Mechanical Properties of an Ultrahigh Strength Martensitic Steel Fabricated Using Laser Metal Deposition Additive Manufacturing | |
Wang, Min1,2 ; Zhang, Qican1; Li, Wengang3; Zhang, Zhen2; Chui, Pengfei3; Yu, Zhiting4; Zhang K(张坤)5,6
| |
| Corresponding Author | Chui, Pengfei([email protected]) ; Zhang, Kun([email protected]) |
| Source Publication | METALS
 |
| 2022-10-01 | |
| Volume | 12Issue:10Pages:15 |
| Abstract | Ultrahigh strength steels were additively manufactured (AM) using different batches of powders by means of the laser metal deposition (LMD) technique. After quenching and tempering treatments, the microstructures, mechanical properties, and fracture modes of ultrahigh strength steels were investigated by several testing methods. The results demonstrate that martensite and Fe3C cementite were found in the three specimens after quenching and tempering treatments, and the tempered martensite microstructure had a lamellar structure in all specimens. The widths of these martensite lathes were observed to be different for the APHT-1, APHT-2, and APHT-3 samples, and their sizes were 1.92 +/- 0.90 mu m, 1.87 +/- 1.09 mu m, and 1.82 +/- 0.85 mu m, respectively. The martensitic steel exhibited excellent mechanical properties (tensile strength and impact toughness). The yield strength and the ultimate tensile strength of the APHT-3 sample reached 1582 MPa and 1779 MPa, respectively. Moreover, the value of the impact energy for the APHT-1 sample was 46.4 J. In addition, with the changes in the batches of ultrahigh strength steel powders, the fracture mode changed from ductile fracture to brittle fracture under tensile force and impact loads. |
| Keyword | additive manufacturing ultrahigh strength steel microstructure mechanical properties heat treatment |
| DOI | 10.3390/met12101646 |
| Indexed By | SCI |
| Language | 英语 |
| WOS ID | WOS:000873019500001 |
| WOS Keyword | OF-THE-ART ; HEAT-TREATMENT ; MARAGING-STEEL ; TEMPERATURE ; PARAMETERS ; BEHAVIOR |
| WOS Research Area | Materials Science ; Metallurgy & Metallurgical Engineering |
| WOS Subject | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| Funding Project | Sichuan Province Science and Technology Major Project[2020ZDZX0014] ; National Natural Science Foundation of China[12272392] |
| Funding Organization | Sichuan Province Science and Technology Major Project ; National Natural Science Foundation of China |
| Classification | 二类 |
| Ranking | 1 |
| Contributor | Chui, Pengfei ; Zhang, Kun |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://dspace.imech.ac.cn/handle/311007/90676 |
| Collection | 微重力重点实验室 |
| Affiliation | 1.Sichuan Univ, Coll Elect & Informat Engn, Chengdu 610065, Peoples R China; 2.Automat Res Inst China South Ind Grp Corp, Mianyang 621000, Sichuan, Peoples R China; 3.Shaanxi Univ Technol, Sch Mat Sci & Engn, Hanzhong 723001, Peoples R China; 4.DFH Satellite Co Ltd, Beijing 100094, Peoples R China; 5.Chinese Acad Sci, Inst Mech, Key Lab Micrograv Natl Micrograv Lab, Beijing 100190, Peoples R China; 6.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China |
| Recommended Citation GB/T 7714 | Wang, Min,Zhang, Qican,Li, Wengang,et al. Investigation of the Microstructure and Mechanical Properties of an Ultrahigh Strength Martensitic Steel Fabricated Using Laser Metal Deposition Additive Manufacturing[J]. METALS,2022,12,10,:15.Rp_Au:Chui, Pengfei, Zhang, Kun |
| APA | Wang, Min.,Zhang, Qican.,Li, Wengang.,Zhang, Zhen.,Chui, Pengfei.,...&张坤.(2022).Investigation of the Microstructure and Mechanical Properties of an Ultrahigh Strength Martensitic Steel Fabricated Using Laser Metal Deposition Additive Manufacturing.METALS,12(10),15. |
| MLA | Wang, Min,et al."Investigation of the Microstructure and Mechanical Properties of an Ultrahigh Strength Martensitic Steel Fabricated Using Laser Metal Deposition Additive Manufacturing".METALS 12.10(2022):15. |
| Files in This Item: | Download All | |||||
| File Name/Size | DocType | Version | Access | License | ||
| Jp2022FA132_2022_Inv（4784KB） | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | View Download | |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment