| Cracking mechanisms in additively manufactured pure tungsten from printing single tracks, thin walls and cubes |
| Chen, Jinhan; Li, Mingshen; Li, Kailun; Zhang, Wenjing; Yang ZM(杨正茂) ; Zhao, Congcong; Ma, Jing; Liu W(刘巍)
|
Corresponding Author | Zhang, Wenjing(wjzhangneu@163.com)
; Yang, Zhengmao(zmyang@imech.ac.cn)
; Liu, Wei(liuw@mail.tsinghua.edu.cn)
|
Source Publication | MATERIALS & DESIGN
|
| 2023-10-01
|
Volume | 234Pages:17 |
ISSN | 0264-1275
|
Abstract | Cracking is a critical issue in the additive manufacturing of pure tungsten (W). To eliminate crack formation, it is imperative to gain an in-depth understanding of the underlying mechanisms behind this process. In this study, we systematically investigated the crack behaviors of single tracks, thin walls, and cubes fabricated using powder bed fusion-laser beam (PBF-LB) technology with nonrotational parallel-hatching scanning. The energy framework was employed to elucidate the mechanism of crack formation. The longitudinal cracks appearing in the microstructures of single tracks and the through cracks existing in thin walls and cubes were characterized. Notably, periodic through cracks extended upward across the sample, appearing at every single hatch in unidirectional samples and at every other hatch in bidirectional samples. The horizontal, longitudinal, and transverse cross sections of cubes were studied to clarify the correlation between through crack arrangement and solidification microstructure. Based on a comprehensive analysis of grain boundaries, we proposed a deformation-cracking competition mechanism in PBF-LB tungsten. Geometric effects in the crack and microstructure were also revealed. This study could provide valuable insights into the formation of cracks in PBF-LB tungsten and serve as a foundation for future investigations aimed at eliminating cracks. |
Keyword | Cracking
Tungsten
Additive manufacturing
Grain boundaries
Microstructures
Geometric effect
|
DOI | 10.1016/j.matdes.2023.112363
|
Indexed By | SCI
; EI
|
Language | 英语
|
WOS ID | WOS:001086876900001
|
WOS Keyword | POWDER BED FUSION
; RESIDUAL-STRESS
; LASER
; MICROSTRUCTURE
; DENSIFICATION
; SUPPRESSION
; PERFORMANCE
; PARAMETERS
; BEHAVIOR
|
WOS Research Area | Materials Science
|
WOS Subject | Materials Science, Multidisciplinary
|
Funding Project | National Magnetic Confinement Fusion Science Program of China[2019YFE03130003]
; National Magnetic Confinement Fusion Science Program of China[2022YEF03130003]
; National Natural Science Foundation of China[51971115]
; National Natural Science Foundation of China[52001135]
; National Natural Science Foundation of China[52105165]
; National Natural Science Foundation of China[52275391]
; China Postdoctoral Science Foundation[2022M711753]
; School of Aerospace Engineering, Tsinghua University
|
Funding Organization | National Magnetic Confinement Fusion Science Program of China
; National Natural Science Foundation of China
; China Postdoctoral Science Foundation
; School of Aerospace Engineering, Tsinghua University
|
Classification | 二类/Q1
|
Ranking | 1
|
Contributor | Zhang, Wenjing
; Yang, Zhengmao
; Liu, Wei
|
Citation statistics |
|
Document Type | 期刊论文
|
Identifier | http://dspace.imech.ac.cn/handle/311007/93268
|
Collection | 宽域飞行工程科学与应用中心
|
Recommended Citation GB/T 7714 |
Chen, Jinhan,Li, Mingshen,Li, Kailun,et al. Cracking mechanisms in additively manufactured pure tungsten from printing single tracks, thin walls and cubes[J]. MATERIALS & DESIGN,2023,234:17.Rp_Au:Zhang, Wenjing, Yang, Zhengmao, Liu, Wei
|
APA |
Chen, Jinhan.,Li, Mingshen.,Li, Kailun.,Zhang, Wenjing.,杨正茂.,...&刘巍.(2023).Cracking mechanisms in additively manufactured pure tungsten from printing single tracks, thin walls and cubes.MATERIALS & DESIGN,234,17.
|
MLA |
Chen, Jinhan,et al."Cracking mechanisms in additively manufactured pure tungsten from printing single tracks, thin walls and cubes".MATERIALS & DESIGN 234(2023):17.
|
Edit Comment