Wall shear stress and wall heat flux in a supersonic turbulent boundary layer subjected to concave surface curvature

doi:10.1103/PhysRevFluids.8.124602

	Wall shear stress and wall heat flux in a supersonic turbulent boundary layer subjected to concave surface curvature
	Tong FL(童福林)1; Duan JY(段俊亦)2,3 ; Ji XX(纪相鑫)2,3 ; Dong, Siwei 1; Yuan, Xianxu 1; Li XL(李新亮)2,3
通讯作者	Yuan, Xianxu([email protected])
发表期刊	PHYSICAL REVIEW FLUIDS
	2023-12-05
卷号	8 期号:12 页码:29
ISSN	2469-990X
摘要	Direct numerical simulation is employed to investigate the characteristics of wall shear stress (WSS) and wall heat flux (WHF) beneath a spatially developing supersonic turbulent boundary layer with a cold-wall thermal condition subjected to a concavely curved compression ramp with a deflection angle of 24 degrees. The Mach number is 2.25 and the friction Reynolds number is 769. Numerical data are exploited to characterize the effect of the concave surface curvature on the statistical and structural properties of the fluctuating WSS and WHF, including the probability density function, space-time correlations, and frequency spectra. Across the curved region, the occurrence probability of extreme negative events is strongly affected by the curvature, as manifested by a noticeable dissimilarity in the large negative tails of the probability density functions. The correlation results show that the streamwise extent of the WSS fluctuations becomes smaller, in contrast to that of the WHF fluctuations, and a considerable decrease in the convection velocity is observed downstream from the curvature. It is found that the curvature qualitatively modifies the WHF frequency spectra, leading to a shift to lower frequencies, while the spectral alternation is less pronounced for the WSS. Importantly, the mean WHF and WSS are also decomposed into different physically informed components, with the finding that the mean WSS generation is fundamentally changed by the curvature but the generation mechanism of the mean WHF is constant throughout the concave surface. Finally, an analysis of velocity and temperature structures is performed with the aid of bidimensional empirical mode decomposition to quantitatively demonstrate the contributions of specific spanwise length scales. We highlight that the outer large-scale organized structures, which are significantly energized by the concave surface, make an increasingly important contribution to the mean WSS and WHF generation.
DOI	10.1103/PhysRevFluids.8.124602
收录类别	SCI ; EI
语种	英语
WOS记录号	WOS:001128824800003
关键词[WOS]	DIRECT NUMERICAL-SIMULATION ; ADVERSE PRESSURE-GRADIENT ; LARGE-EDDY SIMULATION ; SKIN-FRICTION ; COMPRESSION
WOS研究方向	Physics
WOS类目	Physics, Fluids & Plasmas
资助项目	National Natural Science Foundation of China[11972356] ; National Key R&D Program of China[2019YFA0405300]
项目资助者	National Natural Science Foundation of China ; National Key R&D Program of China
论文分区	二类
力学所作者排名	2
RpAuthor	Yuan, Xianxu
引用统计
文献类型	期刊论文
条目标识符	http://dspace.imech.ac.cn/handle/311007/93756
专题	高温气体动力学国家重点实验室
作者单位	1.State Key Lab Aerodynam, Mianyang 621000, Peoples R China; 2.Chinese Acad Sci, Inst Mech, LHD, Beijing 100190, Peoples R China; 3.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China
推荐引用方式 GB/T 7714	Tong FL,Duan JY,Ji XX,et al. Wall shear stress and wall heat flux in a supersonic turbulent boundary layer subjected to concave surface curvature[J]. PHYSICAL REVIEW FLUIDS,2023,8,12,:29.Rp_Au:Yuan, Xianxu
APA	童福林,段俊亦,纪相鑫,Dong, Siwei,Yuan, Xianxu,&李新亮.(2023).Wall shear stress and wall heat flux in a supersonic turbulent boundary layer subjected to concave surface curvature.PHYSICAL REVIEW FLUIDS,8(12),29.
MLA	童福林,et al."Wall shear stress and wall heat flux in a supersonic turbulent boundary layer subjected to concave surface curvature".PHYSICAL REVIEW FLUIDS 8.12(2023):29.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Jp2023A204.pdf（7538KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载