| A theoretical model of cross-flow heat transfer for the cooling process in a horizontal moving bed of high-temperature particles |
| Pan LS(潘利生) ; Shi, Weixiu; Wei XL(魏小林)
|
| Corresponding Author | Pan, Lisheng(panlisheng@imech.ac.cn)
|
| Source Publication | ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS
(IF:0.894[JCR-2018],0.789[5-Year]) |
| 2024-12-31
|
| Volume | 46Issue:1Pages:2922-2940 |
| ISSN | 1556-7036
|
| Abstract | Besides waste gas and liquid, high-temperature particles are important media of waste heat and their temperature exceeds 1000 degrees C on many occasions. The cross-flow heat transfer is important in this waste heat recovering process, but there are few references reported about the theoretical modeling. Therefore, a theoretical model was developed for the cooling process in a horizontal moving bed of high-temperature particles. The purpose of the study is to estimate the influence of temperature field and flow field on heat transfer and bed resistance in the cross-flow cooling process. Three modes such as conduction, convection and radiation are considered in the model. This model was used to analyze heat transfer in a horizontal moving bed of cement clinker and was verified by comparing some simulative results with the tested and collected data from an actual cement clinker plant in China. The simulative temperature of cement clinker was 200 degrees C as same as that collected in the actual cement clinker plant. In the moving bed, the highest pressure drop occurs at the front top and the strongest heat transfer occurs at the front bottom. In the considered conditions with even distribution of cooling air, the highest pressure drop is 3205.9 Pa/m, the biggest specific heat transfer rate of 1683.1 kW/m3. Thermal radiation plays a minor role in this cooling process with the biggest radiation proportion is only 0.149 at the front top. This mode plays a minor role in this cooling process of the cement clinker, comparing with the thermal convection. With constant flow rate of cooling air, the distribution can regulate the local cooling rate rather than the final temperature of the cement clinker. |
| Keyword | Cross-flow heat transfer
high-temperature particles
waste heat recovery
cement clinker
grate cooler
|
| DOI | 10.1080/15567036.2023.2298002
|
| Indexed By | SCI
; EI
|
| Language | 英语
|
| WOS ID | WOS:001157651200001
|
| WOS Keyword | MULTIOBJECTIVE OPTIMIZATION
; TRANSFER COEFFICIENT
; VERTICAL TANK
; GRATE COOLER
|
| WOS Research Area | Energy & Fuels
; Engineering
; Environmental Sciences & Ecology
|
| WOS Subject | Energy & Fuels
; Engineering, Chemical
; Environmental Sciences
|
| Funding Project | National Key Research and Development Program of China[2016YFB0601501]
; National Key R&D Program of China
|
| Funding Organization | National Key Research and Development Program of China
; National Key R&D Program of China
|
| Classification | Q3
|
| Ranking | 1
|
| Contributor | Pan, Lisheng
|
| Citation statistics | 正在获取...
|
| Document Type | 期刊论文
|
| Identifier | http://dspace.imech.ac.cn/handle/311007/94391
|
| Collection | 高温气体动力学国家重点实验室
|
Recommended Citation
GB/T 7714 |
Pan LS,Shi, Weixiu,Wei XL. A theoretical model of cross-flow heat transfer for the cooling process in a horizontal moving bed of high-temperature particles[J]. ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS,2024,46,1,:2922-2940.Rp_Au:Pan, Lisheng
|
| APA |
潘利生,Shi, Weixiu,&魏小林.(2024).A theoretical model of cross-flow heat transfer for the cooling process in a horizontal moving bed of high-temperature particles.ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS,46(1),2922-2940.
|
| MLA |
潘利生,et al."A theoretical model of cross-flow heat transfer for the cooling process in a horizontal moving bed of high-temperature particles".ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS 46.1(2024):2922-2940.
|
Edit Comment