Knowledge Management System of Institue of Mechanics, CAS
| Single-track geometrical characteristics under different energy input and mass addition in coaxial laser cladding | |
Bian YH(边艳华)1,3,4; Tian CX(田崇鑫)1,3 ; Chen, Bo1,3; Dong BX(董斌鑫)1,3; Li SX(李少霞)1,3; Li ZY(李志永)1,3; Nan, YangRui4; He XL(何秀丽)1,2,3; Yu G(虞钢)1,2,3
| |
| Corresponding Author | He, Xiu-Li([email protected]) ; Yu, Gang([email protected]) |
| Source Publication | ADVANCES IN MANUFACTURING
 |
| 2024-04-02 | |
| Pages | 22 |
| ISSN | 2095-3127 |
| Abstract | To provide a broad processing window with a high deposition rate, a comprehensive analysis of single-track geometrical characteristics over a wide range of laser energies and mass inputs in laser cladding is necessary. The formation of a single cladding track of Inconel 718 on a substrate by coaxial laser cladding, with a wide range of laser power from 1 200 W to 3 900 W and a powder feeding rate from 5 g/min to 35 g/min, was studied from both theoretical and experimental points of view. A quantitative model of powder concentration distribution was developed based on the powder transport morphology obtained by high-speed photography. Linear regression models were established between nine geometrical characteristics and the combined process parameters of laser power and powder feeding rate, written as P alpha F beta, to quantitatively analyze the geometrical characteristics of the clad. These were confirmed by large correlation coefficients and analysis of residuals. From the findings we deduced that more energy input enhanced the outward direction of Marangoni convection, leading to the melt pool undergoing evolution from shallow dilution and flat dilution to fluctuating dilution. An almost linear relationship was found between the cladding width, W, and the laser power, indicating that laser energy accumulation was a major factor in the evolution of W. The increase ratio of the cladding height, hc, ranged from 640% to 360% along with an increase in the powder feeding rate, implying that the evolution of hc, was dominated by the powder feeding rate. The total area of the cross-section, A; the area of the clad, Ac; the area of the molten substrate, Am; the total height of the cross-section, H; the penetration depth, hm; the dilution ratio, D; and the wetting angle, theta, were determined by a complex coupling of energy input and mass accumulation, and they are proportional to P0.5F0.2, P0.2F0.5, P0.5/F0.2, P0.3F, P0.5/F0.2, P0.2/F0.2, and P0.2/F0.2, respectively. This research aims to provide general knowledge on the influence of energy input and mass addition on the geometrical characteristics of the clad and its related influence mechanism. Such information could provide a reference and basis for promoting the practical application of laser cladding technology. |
| Keyword | Laser cladding Inconel 718 Clad geometry Linear regression analysis Powder concentration |
| DOI | 10.1007/s40436-023-00478-6 |
| Indexed By | SCI ; EI |
| Language | 英语 |
| WOS ID | WOS:001195755500001 |
| WOS Keyword | EMPIRICAL-STATISTICAL MODEL ; POWDER FLOW ; PREDICTION ; BEHAVIOR ; ALLOY ; METAL ; WELD ; MICROSTRUCTURE ; SOLIDIFICATION ; OPTIMIZATION |
| WOS Research Area | Engineering ; Materials Science |
| WOS Subject | Engineering, Manufacturing ; Materials Science, Multidisciplinary |
| Funding Project | the National Natural Science Foundation of China[11502269] ; the National Natural Science Foundation of China[11672304] ; National Natural Science Foundation of China[Z181100003818015] ; Beijing Municipal Commission of Science and Technology |
| Funding Organization | the National Natural Science Foundation of China ; National Natural Science Foundation of China ; Beijing Municipal Commission of Science and Technology |
| Classification | 二类 |
| Ranking | 1 |
| Contributor | He, Xiu-Li ; Yu, Gang |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://dspace.imech.ac.cn/handle/311007/94831 |
| Collection | 宽域飞行工程科学与应用中心 |
| Affiliation | 1.Chinese Acad Sci, Inst Mech, Beijing 100190, Peoples R China; 2.Univ Chinese Acad Sci, Ctr Mat Sci & Optoelect Engn, Beijing 100049, Peoples R China; 3.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China; 4.Beijing City Univ, Res Inst 3D Printing, Beijing 100083, Peoples R China |
| Recommended Citation GB/T 7714 | Bian YH,Tian CX,Chen, Bo,et al. Single-track geometrical characteristics under different energy input and mass addition in coaxial laser cladding[J]. ADVANCES IN MANUFACTURING,2024:22.Rp_Au:He, Xiu-Li, Yu, Gang |
| APA | 边艳华.,田崇鑫.,Chen, Bo.,董斌鑫.,李少霞.,...&虞钢.(2024).Single-track geometrical characteristics under different energy input and mass addition in coaxial laser cladding.ADVANCES IN MANUFACTURING,22. |
| MLA | 边艳华,et al."Single-track geometrical characteristics under different energy input and mass addition in coaxial laser cladding".ADVANCES IN MANUFACTURING (2024):22. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment