| Low-Cost Photoelectric Flow Rate Sensors Based on a Flexible Planar Curved Beam Structure for Clinical Treatments | |
Cao XF(曹馨芳); Li QL(李沁蓝); Li, Shuang; Xu XK(徐新凯); Wang, Liyang ; Wang, Mengjie; Ding, Bo; Bao, Shengwen; Wang, Shugang; Sun, Bao; Cui, Jingqiang; Wang, Guosheng; Li HL(李晖凌); Su YW(苏业旺)
| |
| Corresponding Author | Su, Yewang([email protected]) |
| Source Publication | ADVANCED HEALTHCARE MATERIALS
 |
| 2024-05-11 | |
| Pages | 10 |
| ISSN | 2192-2640 |
| Abstract | In clinical treatments, reliable flow rate measurements ensure accurate drug delivery during infusions, precise gas delivery during artificial ventilations, etc., thereby reducing patient morbidity and mortality. However, precise flow rate sensors are costly, so medical devices with limited budgets choose cheaper but unsatisfactory flow rate measurement approaches, leading to increased medical risks. Here, a photoelectric flow rate sensor based on a flexible planar curved beam structure (FPCBS) is proposed. The FPCBS ensures low out-of-plane stiffness of the sensitive sheet and allows large deformation in the elastic range, enabling the flow rate sensor to measure the flow rate with high sensitivity over a wide range. Meanwhile, the flow rate sensor can be mass-produced using mature materials and manufacturing technology at less than $5 each. The flow rate sensors are integrated into a commercial infusion pump to measure drug infusion and a home ventilator to monitor respiration. The results are comparable to those measured by a commercial flow rate sensor, demonstrating the applicability of the sensor. Considering its proven outstanding performance at low cost, the flow rate sensor shows great potential in clinical treatment, medical diagnosis, and other medical fields. A photoelectric flow sensor based on a flexible planar curved beam structure with characteristics such as high sensitivity, a wide detection range, and commendable repeatability in detecting both gases and liquids is proposed. The proposed flow rate sensors cost less than five dollars per unit, much lower than current flow sensors used in clinical treatments. image |
| Keyword | flexible structure medical device photoelectric flow rate sensor planar curved beam |
| DOI | 10.1002/adhm.202304573 |
| Indexed By | SCI ; EI |
| Language | 英语 |
| WOS ID | WOS:001218004500001 |
| WOS Keyword | SILICONE |
| WOS Research Area | Engineering ; Science & Technology - Other Topics ; Materials Science |
| WOS Subject | Engineering, Biomedical ; Nanoscience & Nanotechnology ; Materials Science, Biomaterials |
| Funding Project | National Natural Science Foundation of China ; Key Research Program of Frontier Sciences of the Chinese Academy of Sciences[ZDBS-LY-JSC014] ; CAS Interdisciplinary Innovation Team[JCTD-2020-03] ; [12172359] |
| Funding Organization | National Natural Science Foundation of China ; Key Research Program of Frontier Sciences of the Chinese Academy of Sciences ; CAS Interdisciplinary Innovation Team |
| Classification | 一类 |
| Ranking | 1 |
| Contributor | Su, Yewang |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://dspace.imech.ac.cn/handle/311007/95278 |
| Collection | 非线性力学国家重点实验室 |
| Recommended Citation GB/T 7714 | Cao XF,Li QL,Li, Shuang,et al. Low-Cost Photoelectric Flow Rate Sensors Based on a Flexible Planar Curved Beam Structure for Clinical Treatments[J]. ADVANCED HEALTHCARE MATERIALS,2024:10.Rp_Au:Su, Yewang |
| APA | 曹馨芳.,李沁蓝.,Li, Shuang.,徐新凯.,Wang, Liyang.,...&苏业旺.(2024).Low-Cost Photoelectric Flow Rate Sensors Based on a Flexible Planar Curved Beam Structure for Clinical Treatments.ADVANCED HEALTHCARE MATERIALS,10. |
| MLA | 曹馨芳,et al."Low-Cost Photoelectric Flow Rate Sensors Based on a Flexible Planar Curved Beam Structure for Clinical Treatments".ADVANCED HEALTHCARE MATERIALS (2024):10. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment