| A strain-based J-integral formulation for an internal circumferential surface crack of pipeline under inner pressure and large axial deformation | |
Zhao, Di1; Gao, Weitao1; Zhao, Kai1; Zheng, Hang1; Chen, Jian2; Yu, Jilin1; Zheng ZJ(郑志军)1,3
| |
| Corresponding Author | Zheng, Zhijun([email protected]) |
| Source Publication | INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
 |
| 2024-12-01 | |
| Volume | 212Pages:18 |
| ISSN | 0308-0161 |
| Abstract | The presence of cracks on pipelines poses a potential threat to their operational status, and it is critical to assess the permissibility of pipelines containing cracks. The dimensional analysis combined with the finite element method is applied to investigate the fracture behavior of circumferential crack on the internal surface of pipe under internal pressure and large axial deformation. Dimensionless parameters are determined to represent the effects of crack size, pipe geometry, pipe material, and external load on the crack front driving force, and a strain-based J-integral formulation is obtained by a stepwise coefficient fitting approach rather than a polynomial fitting method. This J-integral formula can be used to quickly assess the crack front driving force of a pipe in service condition and subjected to axial displacement. The diameter-to-thickness ratio of the pipe and the dimensionless pressure of the pipe are found to act together in a combined form on the crack front driving force. Increases in dimensionless crack depth, dimensionless crack length, the ratio of circumferential stress to yield strength of the pipe, and strain hardening exponent cause an increase in the crack front driving force. The effect of dimensionless crack depth on crack front driving force is more significant than other dimensionless parameters. Changes in the other dimensionless parameters do not significantly change the crack front driving force when the dimensionless crack depth is small. Other dimensionless parameters have a progressively greater influence on the crack front driving force as the crack dimensionless crack depth increases. Large deformations in the ligament zone and increasing axial stress are the main reasons for the high crack front driving force. The J-integral formula has a similar form to that of the J-integral in the Electric Power Research Institute (EPRI) method when the effect of internal pressure is not considered. It can be reduced to predict the crack front driving force of a surface cracked plate subjected to uniaxial tensile loading. For the interaction between an internal surface crack and an embedded crack, re-characterizing the crack size using BS 7910 will overestimate the equivalent crack depth, and a more accurate equivalent crack size can be obtained using the J-integral formula proposed. |
| Keyword | J-integral Crack front driving force Strain-based formula Dimensional analysis |
| DOI | 10.1016/j.ijpvp.2024.105316 |
| Indexed By | SCI ; EI |
| Language | 英语 |
| WOS ID | WOS:001315290400001 |
| WOS Keyword | LARGE PLASTIC-DEFORMATION ; FRACTURE ASSESSMENT ; OFFSHORE PIPELINES ; SCALE ; DEFECTS ; PLATES |
| WOS Research Area | Engineering |
| WOS Subject | Engineering, Multidisciplinary ; Engineering, Mechanical |
| Funding Project | Science and Technology Research Project of PipeChina[WZXGL202104] ; National Natural Science Foundation of China[12425210] |
| Funding Organization | Science and Technology Research Project of PipeChina ; National Natural Science Foundation of China |
| Classification | 二类/Q1 |
| Ranking | 1 |
| Contributor | Zheng, Zhijun |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://dspace.imech.ac.cn/handle/311007/96764 |
| Collection | 非线性力学国家重点实验室 |
| Affiliation | 1.Univ Sci & Technol China, Dept Modern Mech, CAS Key Lab Mech Behav & Design Mat, Hefei 230027, Anhui, Peoples R China; 2.PipeChina Res Inst, Langfang 065000, Hebei, Peoples R China; 3.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beisihuan West Rd, Beijing 100190, Peoples R China |
| Recommended Citation GB/T 7714 | Zhao, Di,Gao, Weitao,Zhao, Kai,et al. A strain-based J-integral formulation for an internal circumferential surface crack of pipeline under inner pressure and large axial deformation[J]. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING,2024,212:18.Rp_Au:Zheng, Zhijun |
| APA | Zhao, Di.,Gao, Weitao.,Zhao, Kai.,Zheng, Hang.,Chen, Jian.,...&郑志军.(2024).A strain-based J-integral formulation for an internal circumferential surface crack of pipeline under inner pressure and large axial deformation.INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING,212,18. |
| MLA | Zhao, Di,et al."A strain-based J-integral formulation for an internal circumferential surface crack of pipeline under inner pressure and large axial deformation".INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING 212(2024):18. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment