| Effect of Substrate Movement Speed by Synchronous Rolling-casting Freeform Manufacturing for Metal on Microstructure and Mechanical Property of ZLl04 Aluminum Alloy Slurry | |
Luo XQ; Li ZY(李正阳) ; Chen GN(陈光南); Xu WL; Yan QZ; Li, ZY (reprint author), Chinese Acad Sci, Inst Mech, Beijing 100190, Peoples R China.
| |
| Source Publication | JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
 |
| 2015-10 | |
| Volume | 30Issue:5Pages:1056-1060 |
| ISSN | 1000-2413 |
| Abstract | Synchronous rolling-casting freeform manufacturing for Metal (SRCFMM) means that the refined liquid metal is continuously pressed out from the bottom of crucible. There is a horizontal movable plate beneath the outlet. The clearance between the outlet and the plate is about several hundred micrometers. SRCFMM, similar to additive manufacturing, implies layer by layer shaping and consolidation of feedstock to arbitrary configurations, normally using a computer controlled movable plate. The primary dendritic crystal is easily crushed by movement of substrate in the rolling-casting area. ZL104 was used as the test materials, determining the control temperature by differential scanning thermal analysis ( DSC), preparing a kind of samples by SRCFMM, then analyzing microstructures and mechanical property of the samples. Characteristics and distribution of the primary particles were assessed by optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectrum (EDS) and image analysis software. Mechanical property of the samples was assessed by vickers hardness. The results show that the samples fabricated by SRCFMM have uniform structures and good performances with the velocity of the substrate controlled about 10 cm/s and temperature at about 580 degrees C. |
| Keyword | Synchronous Rolling-casting Additive Manufacturing Technology Temperature Substrate Movement Speed |
| DOI | 10.1007/s11595-015-1272-9 |
| URL | 查看原文 |
| Indexed By | SCI ; EI |
| Language | 英语 |
| WOS ID | WOS:000365387000030 |
| WOS Keyword | A356 ALLOY ; SEMISOLID ALLOYS ; VERTICAL PIPE ; FABRICATION |
| WOS Research Area | Materials Science |
| WOS Subject | Materials Science, Multidisciplinary |
| Funding Organization | Funded by the National Natural Science Foundation of China (No. 51341009) |
| Department | MAMYAG激光毛化技术 |
| Classification | Q4 |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://dspace.imech.ac.cn/handle/311007/58379 |
| Collection | 先进制造工艺力学实验室 |
| Corresponding Author | Li, ZY (reprint author), Chinese Acad Sci, Inst Mech, Beijing 100190, Peoples R China. |
| Recommended Citation GB/T 7714 | Luo XQ,Li ZY,Chen GN,et al. Effect of Substrate Movement Speed by Synchronous Rolling-casting Freeform Manufacturing for Metal on Microstructure and Mechanical Property of ZLl04 Aluminum Alloy Slurry[J]. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION,2015,30,5,:1056-1060. |
| APA | Luo XQ,Li ZY,Chen GN,Xu WL,Yan QZ,&Li, ZY .(2015).Effect of Substrate Movement Speed by Synchronous Rolling-casting Freeform Manufacturing for Metal on Microstructure and Mechanical Property of ZLl04 Aluminum Alloy Slurry.JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION,30(5),1056-1060. |
| MLA | Luo XQ,et al."Effect of Substrate Movement Speed by Synchronous Rolling-casting Freeform Manufacturing for Metal on Microstructure and Mechanical Property of ZLl04 Aluminum Alloy Slurry".JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION 30.5(2015):1056-1060. |
| Files in This Item: | Download All | |||||
| File Name/Size | DocType | Version | Access | License | ||
| J2015-026.pdf（1985KB） | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | View Download | |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment