We report on a novel approach to design typical ultrafine lamellar eutectic structure in bimodal alloys fabricated by semi-solid sintering (SSS) of a eutectic mixture. In our work ultrafine lamellar eutectic structure was implemented by controlling the phase composition of eutectic reaction and consequently by regulating the structure of eutectic reaction-induced liquid phase through varying component number. Microstructure analysis indicate that although all SSSed alloys have the same three phase constitutions of bcc beta-Ti(Fe Co) and fcc Ti-2(Co Fe) the morphology and distribution of the eutectic structure transforms from limited length and minor quantity to partial fine alternating bcc beta-Ti and bcc Ti(Fe Co) lamellae and further to typical complete ultrafine alternating continuous lamellae in the SSSed ternary Ti-Fe-Co quaternary Ti-Fe-Co-Nb and quinary Ti-Fe-Co-Nb-Al alloys. Interestingly the SSSed Ti-Fe-Co-Nb-Al alloy presents a novel bimodal microstructure of coarse fcc Ti-2(Co Fe) surrounded by an ultrafine lamellar eutectic matrix containing ultrafine bcc beta-Ti and bcc Ti(Fe Co) lamellae. This bimodal microstructure exhibits ultra-high yield strength of 2050 MPa with plasticity in compression of 19.7% which exceed published values of equivalent materials. Our results provide a novel pathway for fabricating new-structure metallic alloys for high-performance structural applications. (C) 2017 Elsevier B.V. All rights reserved.