| Damage characterizations and simulation of selective laser melting fabricated 3D re-entrant lattices based on in-situ CT testing and geometric reconstruction | |
Geng LC; Wu WW; Sun LJ(孙立娟) ; Fang DN
| |
| Corresponding Author | Wu, Wenwang([email protected]) ; Fang, Daining([email protected]) |
| Source Publication | INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
 |
| 2019-07-01 | |
| Volume | 157Pages:231-242 |
| ISSN | 0020-7403 |
| Abstract | In recent years, metal additive manufacturing (AM) are widely employed for industrial applications, such as: biomedical, aerospace, automotive, marine and offshore sections. AM demonstrated superior manufacturing efficiencies and economic advantages for advanced lightweight industrial components with unlimited arbitrary topological layouts and complex internal microstructures, and are also employed for fabrication of auxetic materials and structures. In this paper, damage characterizations and mechanical behaviors of selective laser melting (SLM) fabricated 3D re-entrant lattices are investigated based on in-situ interrupted micro-CT test, and simulation based on geometric reconstructed models are performed for exploring the underlying failure mechanisms. Firstly, theoretical models for predicting the mechanical properties of 3D re-entrant lattice are developed, such as stiffness, Poisson's ratio and strength, etc. Secondly, the geometrical errors and fabrication defects of 3D reentrant lattices are analyzed based on 3D micro-CT scanning, in-situ micro-CT interrupted compression tests are performed for studying the deformation process and failure mechanisms. Finally, image finite element models with the detailed information of the shape, position and distribution of defects of the 3D reentrant lattices are constructed from 3D tomographic images, and numerical simulations are performed for studying the effects of the defects on the mechanical performances of the SLM additive manufactured 3D re-entrant lattice structures. It is shown that the failure behavior of the reentrant lattice is governed not only by its topology, but also by the geometric defects and surface defects. Moreover, the proposed interrupted in-situ micro-CT mechanical loading experiments and image finite element approaches can also shed lights on the relations between fracture failure around the edge and the powder adhesion. The damage evolution process is compared with the numerical simulation results to verify the materials failure modes. |
| Keyword | Selective laser melting Computed tomography Image finite element Re-entrant In-situ mechanical test |
| DOI | 10.1016/j.ijmecsci.2019.04.054 |
| Indexed By | SCI ; EI |
| Language | 英语 |
| WOS ID | WOS:000473379100018 |
| WOS Keyword | MECHANICAL-PROPERTIES ; SURFACE-ROUGHNESS ; DEFORMATION ; BEHAVIOR ; IMPERFECTION ; COMPRESSION ; TOMOGRAPHY ; PREDICTION ; STIFFNESS ; DEFECTS |
| WOS Research Area | Engineering ; Mechanics |
| WOS Subject | Engineering, Mechanical ; Mechanics |
| Funding Project | Foundation for Innovative Research Groups of the National Natural Science Foundation of China[11521202] ; Project of State Key Laboratory of Explosion Science and Technology |
| Funding Organization | Foundation for Innovative Research Groups of the National Natural Science Foundation of China ; Project of State Key Laboratory of Explosion Science and Technology |
| Classification | 一类 |
| Ranking | 3 |
| Contributor | Wu, Wenwang ; Fang, Daining |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://dspace.imech.ac.cn/handle/311007/79437 |
| Collection | 非线性力学国家重点实验室 |
| Recommended Citation GB/T 7714 | Geng LC,Wu WW,Sun LJ,et al. Damage characterizations and simulation of selective laser melting fabricated 3D re-entrant lattices based on in-situ CT testing and geometric reconstruction[J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2019,157:231-242.Rp_Au:Wu, Wenwang, Fang, Daining |
| APA | Geng LC,Wu WW,孙立娟,&Fang DN.(2019).Damage characterizations and simulation of selective laser melting fabricated 3D re-entrant lattices based on in-situ CT testing and geometric reconstruction.INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,157,231-242. |
| MLA | Geng LC,et al."Damage characterizations and simulation of selective laser melting fabricated 3D re-entrant lattices based on in-situ CT testing and geometric reconstruction".INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES 157(2019):231-242. |
| Files in This Item: | Download All | |||||
| File Name/Size | DocType | Version | Access | License | ||
| Jp2019220.pdf（5671KB） | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | View Download | |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment