| Strain rate dependent shear localization and deformation mechanisms in the CrMnFeCoNi high-entropy alloy with various microstructures | |
Yang ZL(杨正凌)1,2; Yang MX(杨沐鑫)1 ; Ma Y(马彦)1,2; Zhou LL(周玲玲)1; Cheng WQ(程文强)1,2; Yuan FP(袁福平)1,2; Wu XL(武晓雷)1,2
| |
| Corresponding Author | Yuan, Fuping([email protected]) |
| Source Publication | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 2020-08-19 | |
| Volume | 793Pages:10 |
| ISSN | 0921-5093 |
| Abstract | CrMnFeCoNi high-entropy alloys (HEA) with various microstructures have been produced using cold rolling followed by critical annealing at various temperatures. Shear deformation behaviors of this HEA with various microstructures at a wide range of strain rates (2 x 10(-3)-5 x 10(4) s(-1)) have been characterized using hat-shaped specimens. Strain hardening exponent and strain rate sensitivity have been obtained for various microstructures. No shear localization was observed up to shear strain of 8 for all microstructures under lower strain rates (2 x 10(-3)-1 x 10(1) s(-1)), while stress drop and shear localization were found to occur at various critical shear strains for various microstructures under dynamic shear loading (5 x 10(4) s(-1)). A new formula, considering competition of strain hardening and strain rate hardening against thermal softening, was proposed to estimate the critical shear strains under dynamic shear loading and the predicted results were found to be in a fairly good agreement with the experimental data. Based on micro-hardness testing, the strain hardening due to the microstructure evolution was found be much stronger under dynamic shear loading than that under quasi-static loading at the same interrupted shear strain, which can be attributed to the more efficient grain refinement and the triggered hierarchical deformation nanotwins under dynamic shear deformation. |
| Keyword | High entropy alloys Deformation twins Shear localization Strain rate effect Strain hardening |
| DOI | 10.1016/j.msea.2020.139854 |
| Indexed By | SCI ; EI |
| Language | 英语 |
| WOS ID | WOS:000578957200026 |
| WOS Keyword | RATE SENSITIVITY ; IMPACT TOUGHNESS ; HIGH-STRENGTH ; BEHAVIOR ; GRAIN ; CRCONI ; STABILITY ; EVOLUTION ; NANOTWINS ; DUCTILITY |
| WOS Research Area | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
| WOS Subject | Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| Funding Project | National Key R&D Program of China[2017YFA0204402] ; National Natural Science Foundation of China[11672313] ; National Natural Science Foundation of China[11790293] ; Strategic Priority Research Program of the Chinese Academy of Sciences[XDB22040503] |
| Funding Organization | National Key R&D Program of China ; National Natural Science Foundation of China ; Strategic Priority Research Program of the Chinese Academy of Sciences |
| Classification | 一类 |
| Ranking | 1 |
| Contributor | Yuan, Fuping |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://dspace.imech.ac.cn/handle/311007/85385 |
| Collection | 非线性力学国家重点实验室 |
| Affiliation | 1.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, 15 Beisihuan West Rd, Beijing 100190, Peoples R China; 2.Univ Chinese Acad Sci, Sch Engn Sci, 19A Yuquan Rd, Beijing 100049, Peoples R China |
| Recommended Citation GB/T 7714 | Yang ZL,Yang MX,Ma Y,et al. Strain rate dependent shear localization and deformation mechanisms in the CrMnFeCoNi high-entropy alloy with various microstructures[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2020,793:10.Rp_Au:Yuan, Fuping |
| APA | 杨正凌.,杨沐鑫.,马彦.,周玲玲.,程文强.,...&武晓雷.(2020).Strain rate dependent shear localization and deformation mechanisms in the CrMnFeCoNi high-entropy alloy with various microstructures.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,793,10. |
| MLA | 杨正凌,et al."Strain rate dependent shear localization and deformation mechanisms in the CrMnFeCoNi high-entropy alloy with various microstructures".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 793(2020):10. |
| Files in This Item: | Download All | |||||
| File Name/Size | DocType | Version | Access | License | ||
| Jp2020300.pdf（13197KB） | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | View Download | |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment