Fatigue failures from defects in additive manufactured components: A statistical methodology for the analysis of the experimental results

doi:10.1111/ffe.13467

IMECH-IR > 非线性力学国家重点实验室

	Fatigue failures from defects in additive manufactured components: A statistical methodology for the analysis of the experimental results
	Tridello, Andrea 1; Boursier Niutta, Carlo 1; Berto, Filippo 2; Qian GA(钱桂安)3,4 ; Paolino, Davide S.1
通讯作者	Tridello, Andrea([email protected])
发表期刊	FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
	2021-05-05
页码	17
ISSN	8756-758X
摘要	The fatigue response of additive manufactured (AMed) components is generally controlled by the defect population, and the models for assessing the fatigue response of AMed parts have to take into account the distribution of defect size and the intrinsic scatter associated to the fatigue response. In the present paper, a statistical methodology for analyzing the results of tests on AMed specimens failed due to cracks originating from defects is proposed. The procedure involves the estimation of the distribution of the fatigue life, which is considered dependent on the applied stress amplitude and on the defect size. Thereafter, all the experimental failures are shifted at a reference number of cycles to failure or stress amplitude, making it possible to compare data obtained at different stress levels or number of cycles to failure. The proposed method has been successfully validated on literature dataset, proving its effectiveness and general validity.
关键词	additive manufacturing (AM) building orientation PSN curves EBM fatigue response SLM
DOI	10.1111/ffe.13467
收录类别	SCI ; EI
语种	英语
WOS记录号	WOS:000647095700001
关键词[WOS]	MECHANICAL-BEHAVIOR ; ALSI10MG ; CURVES ; TI-6AL-4V ; STRENGTH ; REGIME ; LIFE
WOS研究方向	Engineering ; Materials Science
WOS类目	Engineering, Mechanical ; Materials Science, Multidisciplinary
资助项目	CAS Pioneer Hundred Talents Program ; National Natural Science Foundation of China[11872364] ; National Natural Science Foundation of China[12072345] ; National Natural Science Foundation of China[11932020]
项目资助者	CAS Pioneer Hundred Talents Program ; National Natural Science Foundation of China
论文分区	二类/Q1
力学所作者排名	3+
RpAuthor	Tridello, Andrea
引用统计	被引频次：16[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://dspace.imech.ac.cn/handle/311007/86591
专题	非线性力学国家重点实验室
作者单位	1.Politecn Torino, Dept Mech & Aerosp Engn, Cso Duca degli Abruzzi 24, I-10129 Turin, Italy; 2.Norwegian Univ Sci & Technol NTNU, Dept Mech & Ind Engn, Trondheim, Norway; 3.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech LNM, Beijing, Peoples R China; 4.Univ Chinese Acad Sci, Sch Engn Sci, Beijing, Peoples R China
推荐引用方式 GB/T 7714	Tridello, Andrea,Boursier Niutta, Carlo,Berto, Filippo,et al. Fatigue failures from defects in additive manufactured components: A statistical methodology for the analysis of the experimental results[J]. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES,2021:17.Rp_Au:Tridello, Andrea
APA	Tridello, Andrea,Boursier Niutta, Carlo,Berto, Filippo,钱桂安,&Paolino, Davide S..(2021).Fatigue failures from defects in additive manufactured components: A statistical methodology for the analysis of the experimental results.FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES,17.
MLA	Tridello, Andrea,et al."Fatigue failures from defects in additive manufactured components: A statistical methodology for the analysis of the experimental results".FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021):17.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Jp2021201.pdf（9808KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载