On the Space Thermal Destratification in a Partially Filled Hydrogen Propellant Tank by Jet Injection

doi:10.1007/s12217-021-09923-2

IMECH-IR > 微重力重点实验室

	On the Space Thermal Destratification in a Partially Filled Hydrogen Propellant Tank by Jet Injection
	Li JC(李吉成)1,2; Guo B(郭斌)1,3 ; Zhao JF(赵建福)1,3 ; Li K(李凯)1,3 ; Hu WR(胡文瑞)1,3
通讯作者	Li, Kai([email protected])
发表期刊	MICROGRAVITY SCIENCE AND TECHNOLOGY
	2022-02-01
卷号	34 期号:1 页码:6
ISSN	0938-0108
摘要	Hydrogen, as a space propellant, plays an important role in future space energy systems. However, it is sensitive to heat leakage from the environment because of its low boiling point and small density. Besides, the buoyancy convection is weakened and even completely suppressed in space microgravity environment. When there is heat leakage on the wall of the propellant tank, temperature stratification will be produced around the heat leakage source, resulting in propellant overheating. This will affect the interfacial heat and mass transfer, leading to pressure rise in the tank, and even endanger the structural safety of the system. To prevent tank pressure from rising above its design limits, venting or active pressure control techniques must be implemented. The cryogenic jet mixing is an effective method to suppress temperature stratification. The cryogenic fluid is mixed with the fluid inside the tank through a jet nozzle to reduce the thermal stratification and achieve uniform temperature distribution. In the present study, the temperature stratification phenomenon caused by heat leakage and its destratification via a cryogenic jet under microgravity condition were numerically investigated in the context of a partially liquid-filled large scale model tank. The effects of cryogenic jet mixing on the elimination of temperature stratification were analyzed for different initial filling ratios and mass flow rates. The results show that a higher incident mass flow rate can effectively destroy the temperature stratification inside the tank and promote an inside fluid flow for a given liquid filling ratio. A smaller filling ratio results in a faster growth in both average temperature and average pressure, and a larger amount of mass transfer inside the tank. It is more efficient to implement the cryogenic jet injection in the early stage when the remained propellant is still abundant, or adopt a higher incident mass flow rate to suppress the thermal stratification in the tank.
关键词	Microgravity Thermal destratification Cryogenic jet mixing Two-phase flow
DOI	10.1007/s12217-021-09923-2
收录类别	SCI ; EI
语种	英语
WOS记录号	WOS:000736778700001
WOS研究方向	Engineering ; Thermodynamics ; Mechanics
WOS类目	Engineering, Aerospace ; Thermodynamics ; Mechanics
资助项目	Key Research Program of Frontier Sciences, CAS[QYZDY-SSW-JSC040] ; National Nature Science Foundation of China[12172363] ; National Nature Science Foundation of China[11672311]
项目资助者	Key Research Program of Frontier Sciences, CAS ; National Nature Science Foundation of China
论文分区	二类
力学所作者排名	1
RpAuthor	Li, Kai
引用统计	被引频次：2[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://dspace.imech.ac.cn/handle/311007/88246
专题	微重力重点实验室
作者单位	1.Chinese Acad Sci, Inst Mech, Natl Micrograv Lab, Beijing 100190, Peoples R China; 2.Lanzhou Univ Technol, Sch Energy & Power Engn, Lanzhou 730050, Peoples R China; 3.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China
推荐引用方式 GB/T 7714	Li JC,Guo B,Zhao JF,et al. On the Space Thermal Destratification in a Partially Filled Hydrogen Propellant Tank by Jet Injection[J]. MICROGRAVITY SCIENCE AND TECHNOLOGY,2022,34,1,:6.Rp_Au:Li, Kai
APA	李吉成,郭斌,赵建福,李凯,&胡文瑞.(2022).On the Space Thermal Destratification in a Partially Filled Hydrogen Propellant Tank by Jet Injection.MICROGRAVITY SCIENCE AND TECHNOLOGY,34(1),6.
MLA	李吉成,et al."On the Space Thermal Destratification in a Partially Filled Hydrogen Propellant Tank by Jet Injection".MICROGRAVITY SCIENCE AND TECHNOLOGY 34.1(2022):6.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Jp2022FA539_2022_On （8202KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载