Microstructure and Size-Dependent Mechanical Properties of Additively Manufactured 316L Stainless Steels Produced by Laser Metal Deposition

doi:10.1007/s40195-022-01445-z

IMECH-IR > 微重力重点实验室

	Microstructure and Size-Dependent Mechanical Properties of Additively Manufactured 316L Stainless Steels Produced by Laser Metal Deposition
	Jiang HZ(蒋华臻); Chen QS(陈启生); Li ZY(李正阳); Chen, XinYe ; Sun HL(孙辉磊); Yao SK(姚少科); 房佳汇钰; Hu QY(胡琦芸)
发表期刊	ACTA METALLURGICA SINICA-ENGLISH LETTERS
	2023-01
卷号	36 期号:1 页码:1-20
ISSN	1006-7191
摘要	Metal additive manufacturing (AM), as a disruptive technology in the field of fabricating metallic parts, has shown its ability to design component with macrostructural complexity. However, some of these functionally complex structures typically contain a wide range of feature sizes, namely, the characteristic length of elements in AM-produced components can vary from millimeter to meter-scale. The requisite for controlling performance covers nearly six orders of magnitude, from the microstructure to macro scale structure. Understanding the mechanical variation with the feature size is of critical importance for topology optimization engineers to make required design decisions. In this work, laser metal deposition (LMD) is adopted to manufacture 316L stainless steel (SS) samples. To evaluate the effect of defects and specimen size on mechanical properties of LMD-produced samples, five rectangular sample sizes which ranged from non-standard miniature size to ASTM standard sub-sized samples were machined from the block. Tensile test reveals that the mechanical properties including yield strength (YS), ultimate tensile strength (UTS), and elongation to failure (epsilon(f)) are almost the identical for samples with ASTM standard size. Whilst, relatively lower YS and UTS values, except for epsilon(f), are observed for samples with a miniature size compared with that of ASTM standard samples. The epsilon(f) values of LMD-produced 316L SS samples show a more complex trend with sample size, and are affected by three key influencing factors, namely, slimness ratio, cluster of pores, and occupancy location of lack of fusion defects. In general, the epsilon(f) values exhibit a decreasing trend with the increase of slimness ratio. Microstructure characterization reveals that the LMD-produced 316L samples exhibited a high stress status at low angle grain boundaries, whilst its location changed to high angle grain boundaries after plastic deformation. The grain size refinement and austenite-to-martensite phase transformation occurred during plastic deformation might be responsible for the very high YS and UTS attained in this study. The experimental works carried out in this study is expected to provide a guideline for evaluating the mechanical properties of LMD-produced parts with complex structure, where critical parameter such as a certain slimness ratio has to be considered.
关键词	Additive manufacturing Laser metal deposition 316L stainless steel Tensile properties Slimness ratio
学科领域	Metallurgy & Metallurgical Engineering
DOI	10.1007/s40195-022-01445-z
收录类别	SCI ; EI ; CSCD
语种	英语
WOS记录号	WOS:000841081800003
项目资助者	National Natural Science Foundation of China [11772344]
论文分区	二类/Q1
力学所作者排名	1
RpAuthor	Chen, QS ; Li, ZY (corresponding author), Chinese Acad Sci, Inst Mech, Beijing 100190, Peoples R China. ; Chen, QS ; Li, ZY (corresponding author), Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100190, Peoples R China.
引用统计	被引频次：1[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://dspace.imech.ac.cn/handle/311007/90139
专题	微重力重点实验室宽域飞行工程科学与应用中心
作者单位	1.{Jiang Hua-Zhen, Chen Qi-Sheng, Li Zheng-Yang, Sun Hui-Lei, Yao Shao-Ke, Fang Jia-Huiyu, Hu Qi-Yun} Chinese Acad Sci Inst Mech Beijing 100190 Peoples R China 2.{Chen Qi-Sheng, Li Zheng-Yang, Yao Shao-Ke, Fang Jia-Huiyu, Hu Qi-Yun} Univ Chinese Acad Sci Sch Engn Sci Beijing 100190 Peoples R China 3.{Chen Xin-Ye} DE Testing JIANGSU Co LTD Changzhou 213164 Peoples R China
推荐引用方式 GB/T 7714	Jiang HZ,Chen QS,Li ZY,et al. Microstructure and Size-Dependent Mechanical Properties of Additively Manufactured 316L Stainless Steels Produced by Laser Metal Deposition[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2023,36,1,:1-20.Rp_Au:Chen, QS, Li, ZY (corresponding author), Chinese Acad Sci, Inst Mech, Beijing 100190, Peoples R China., Chen, QS, Li, ZY (corresponding author), Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100190, Peoples R China.
APA	蒋华臻.,陈启生.,李正阳.,Chen, XinYe.,孙辉磊.,...&胡琦芸.(2023).Microstructure and Size-Dependent Mechanical Properties of Additively Manufactured 316L Stainless Steels Produced by Laser Metal Deposition.ACTA METALLURGICA SINICA-ENGLISH LETTERS,36(1),1-20.
MLA	蒋华臻,et al."Microstructure and Size-Dependent Mechanical Properties of Additively Manufactured 316L Stainless Steels Produced by Laser Metal Deposition".ACTA METALLURGICA SINICA-ENGLISH LETTERS 36.1(2023):1-20.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Jp2022FA209_2022_Mic（16437KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载