Statistical size scaling of compressive strength of quasi-brittle materials incorporating specimen length-to-diameter ratio effect

doi:10.1016/j.tafmec.2019.102345

IMECH-IR > 非线性力学国家重点实验室

	Statistical size scaling of compressive strength of quasi-brittle materials incorporating specimen length-to-diameter ratio effect
	Lei WS 1; Qian GA(钱桂安)2 ; Yu ZS 3; Berto F 4
通讯作者	Qian, Guian([email protected]) ; Yu, Zhishui([email protected])
发表期刊	THEORETICAL AND APPLIED FRACTURE MECHANICS
	2019-12-01
卷号	104 页码:9
ISSN	0167-8442
摘要	Statistical size scaling of compressive strength of quasi-brittle materials demands to define a global stress parameter pertinent to the well accepted mechanism of shear stress induced fracture. The work proposes to adopt the resultant stress acting on the diagonal cross-section of a uniaxial compression specimen from one loading end to the other loading end in place of the conventional nominal compressive stress on two loading ends for statistical size scaling. As a result, the size effect on compressive strength is partitioned into specimen volume effect and specimen length-to-diameter ratio effect according to a recently developed formulation for the generalized weakest link statistics. This proposal is validated by three published data sets on the compressive strength of concrete, rock and four cohesive soils as preliminary case studies.
关键词	Unconfined compressive strength Quasi-brittle materials Statistical size scaling Volume effect Length-to-diameter ratio effect
DOI	10.1016/j.tafmec.2019.102345
收录类别	SCI ; EI
语种	英语
WOS记录号	WOS:000505101300022
关键词[WOS]	FRACTURE ; FAILURE
WOS研究方向	Engineering ; Mechanics
WOS类目	Engineering, Mechanical ; Mechanics
资助项目	National Natural Science Foundation of China[11872364] ; Chinese Academy of Science (CAS) Pioneer Hundred Talents Program
项目资助者	National Natural Science Foundation of China ; Chinese Academy of Science (CAS) Pioneer Hundred Talents Program
论文分区	二类
力学所作者排名	1
RpAuthor	Qian, Guian ; Yu, Zhishui
引用统计	被引频次：25[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://dspace.imech.ac.cn/handle/311007/81287
专题	非线性力学国家重点实验室
作者单位	1.Appl Mat Inc, Bldg 81,M-S 81305,974 East Argues Ave, Sunnyvale, CA 94085 USA; 2.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech LNM, Beijing 100190, Peoples R China; 3.Shanghai Univ Engn Sci, Sch Mat Engn, 333 Long Teng Rd, Shanghai 201620, Peoples R China; 4.Norwegian Univ Sci & Technol NTNU, Dept Mech & Ind Engn, Richard Birkelands Vei 2b, N-7491 Trondheim, Norway
推荐引用方式 GB/T 7714	Lei WS,Qian GA,Yu ZS,et al. Statistical size scaling of compressive strength of quasi-brittle materials incorporating specimen length-to-diameter ratio effect[J]. THEORETICAL AND APPLIED FRACTURE MECHANICS,2019,104:9.Rp_Au:Qian, Guian, Yu, Zhishui
APA	Lei WS,钱桂安,Yu ZS,&Berto F.(2019).Statistical size scaling of compressive strength of quasi-brittle materials incorporating specimen length-to-diameter ratio effect.THEORETICAL AND APPLIED FRACTURE MECHANICS,104,9.
MLA	Lei WS,et al."Statistical size scaling of compressive strength of quasi-brittle materials incorporating specimen length-to-diameter ratio effect".THEORETICAL AND APPLIED FRACTURE MECHANICS 104(2019):9.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Jp2019477.pdf（2299KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载